Segway is a big name in electric scooters, and for good reason—they’re designed with safety in mind, including built-in speed limits. But these limits can be frustrating for advanced riders who want more speed and control.
If you’re eager to learn how to turn off speed limit on Segway Ninebot Scooter, you’re in the right place! We’ll show you six proven methods to remove the speed limit and unlock its full potential.
Before we dive in, let’s get one thing clear: safety always comes first. When modifying your scooter’s speed limit, make sure you’re following local laws and being super cautious. It’s all about balancing speed with responsibility.
Method 1: Manually Disabling the Speed Limiter on Segway Ninebot
Got a Segway electric scooter with a speed limiter? Want to tweak the settings? Here’s how:
1. Turn off the display.
2. Press the electric brake.
3. Turn the display back on and adjust the speed limit to your liking.
4. Press the “S” button to lock in your changes.
Want to ditch the speed limiter altogether? Follow these extra steps:
1. Press the brake.
2. Press the power button until you see “P1” on the display.
3. Change “P1” to “P3” and press the “A” button to confirm.
Important Note: Removing the speed limiter on Segway scooters can vary depending on the model. What works for one might not work for another. So, I’ve got more methods below—check which one works for your specific Ninebot!
Method 2: Removing Speed Limiter on Ninebot F-Series
Got an F-series Ninebot scooter and want to give it a speed boost? Here’s what you need to know:
Step 1: Check Your Firmware
Make sure your scooter isn’t running firmware version DRV5.6.9 or higher. If it is, you might need to downgrade or try another method we’ll cover later.
Step 2: Verify Local Laws
Before you start, check your local laws. Modifications might be illegal in your area, so it’s crucial to stay on the right side of the law.
Step 3: Use Official Ninebot Firmware
This method only works with official Ninebot firmware. If you’ve used custom firmware from third-party sites, it might not work.
Step 4: Get the Right Tools
You’ll need an Android device with Bluetooth 5.0 or higher, your Ninebot F-series scooter, and the ScooterHacking Utility app. Simple enough!
Step 5: Follow the Guide
Here’s what to do:
1. Download the ScooterHacking Utility app.
2. Turn on your scooter and connect it to the app.
3. Go to the “Tools” section and select “Change region.“
4. Choose “Global – (Your Scooter’s Model)” from the menu.
Your scooter will reboot, and you’ll see changes in the serial number and region.
If you’ve followed all the steps correctly, your scooter should now be able to hit 30 km/h in Sport mode!
Method 3: Unlocking Ninebot Scooter Speed Using DownG App
Want to unlock your scooter’s speed using your Android phone? Here’s how:
1. Download the “downG” app from the Play Store.
2. Connect your Segway scooter.
3. Head to Tools, then Advanced Tools.
4. Change the serial number to start with “S1GNA.”
5. Disconnect your Segway and power cycle it.
6. You’re all set! Enjoy your scooter’s increased speed and cruise control!
Method 4: Removing Speed Limit of Ninebot G30 (by using XiaoFlasher App)
1. First up, grab the XiaoFlasher App from the Google Play Store. Easy peasy!
2. Next, download the G30DRAGSTER.zip file, but don’t unzip it just yet. We’ll get to that later.
3. Now, fire up your Segway Ninebot scooter and open XiaoFlasher on your Android phone.
4. See your scooter’s name in the app? Give it a tap.
5. Look for “Change Region” in the app and set it to “US 30KM/H”. That’s where the magic happens!
6. Hit “Change Region” again, but this time pick “Custom Serial”.
7. Now, punch in your scooter’s unique serial number. Make sure you get it right!
8. Time to tap on “Select Zip File”. This is where that downloaded file comes in handy.
9. Find and select that zip file you downloaded earlier.
10. Ready for the big moment? Click “Flash Selected ZIP file”.
11. Last step: Reboot your scooter. Voila! You’ve just unlocked your Segway Ninebot Max G30. Time to enjoy that extra speed!
- Also Read: How to Make Electric Scooter Faster?
Method 5: Modifying Firmware with ST-Link (Risky)
Want to take your Ninebot scooter modding to the next level? Using an ST-Link is a more advanced method that gives you direct access to the scooter’s controller. It offers more flexibility but be warned: it’s riskier and can damage your scooter if you’re not careful.
Requirements
1. ST-Link V2 Programmer: You’ll need this hardware tool to communicate with your scooter’s microcontroller.
2. Scooter Firmware: Get the right firmware file for your Ninebot model. Make sure it’s compatible.
3. ST-Link Utility Software: Download and install this software to work with the ST-Link programmer.
4. Hex Editor: You might need this to tweak firmware values.
Steps to Flash and Modify Speed Using ST-Link
Step 1: Identify the Scooter’s Controller
Open up your scooter and find the controller board. It usually has an STM32 microcontroller.
Step 2: Connect the ST-Link Programmer
Hook up the ST-Link programmer to the right pins on the controller board. Double-check the connections and know your scooter’s pinout.
Step 3: Install ST-Link Utility
If you haven’t already, install the ST-Link Utility software on your computer.
Step 4: Read the Current Firmware
Open the ST-Link Utility software, connect your programmer, and read the current firmware. This is your backup in case things go wrong.
Step 5: Modify the Firmware
Use a hex editor to find and change the speed values in the firmware. Be super careful—wrong changes can cause issues.
Step 6: Flash the Modified Firmware
Use the ST-Link Utility software to flash the modified firmware to the scooter’s controller. Keep the power stable during this step.
After flashing the new firmware, put your scooter back together and test it out. Make sure it’s working safely and as expected.
Method 6: Custom Speed Controller for Ninebot Scooters
Want to know your Ninebot Max scooter’s top speed? It depends on whether you have a Gen 1 or Gen 2 motor. Check the serial number: if it starts with a 6, you’ve got a Gen 1 (33 km/h). If it starts with a 9, you’re rocking a Gen 2 (38-40 km/h downhill).
Ready for even more speed? Consider tweaking the firmware, swapping out the speed controller, or upgrading your battery. These mods can give you a serious boost!
Looking for expert help? Head over to the My Max Mods website. They’ve got products and reviews from riders who’ve unlocked their scooters’ full potential. Adventure is calling—let My Max Mods help you answer!
- Also Read: How to Reset Electric Scooter?
Conclusion
We’ve covered six methods to unlock your Segway Ninebot’s full potential. But remember, safety and responsibility always come first. Whether you’re tweaking settings manually or using more advanced methods, make sure you’re respecting local rules.
With the right know-how and precautions, you can enjoy a thrilling, customized ride on your Segway Ninebot. Ride safe and responsibly!