Do you own a Segway Ninebot Max G30LP and want to make it faster? You’re in the right place! This guide will show you exactly how to make Segway Ninebot Max G30LP faster and unlock its speed potential.
Unlocking your Segway Ninebot Max G30LP’s full speed potential can seriously enhance your ride. In this article, we’ll cover six proven speed hacks, from simple tweaks to advanced modifications. These tips will help your scooter perform at its best.
Whether you need a quick speed boost or a complete upgrade, these tips will guide you every step of the way. Get ready to enhance your Segway Ninebot scooter and enjoy a faster, more thrilling ride!
Basic Tips & Tricks to Make Your Electric Scooter Faster
Lighten the Load
One of the easiest ways to boost your scooter’s speed is by reducing unnecessary weight. Remove any extra parts or accessories you don’t use. Also, avoid carrying heavy loads or extra passengers. A lighter scooter moves more freely and performs better.
Check Tire Pressure and Alignment
Low tire pressure creates drag and slows you down. Keep your tires properly inflated to reduce friction and help your scooter glide more efficiently. Just topping up your tires can add 1–3 mph to your speed.
- Also Read: How Tire Pressure Affects Your Scooter Range
Inspect the Brakes
Make sure your brake pads aren’t rubbing against the rotor or tire rim. Even a slight drag can sap power and slow your ride. Also, check that the brake lever snaps back after use. If it sticks, it could be causing unnecessary resistance.
Always Ride on a Full Charge
A full battery gives your motor more voltage to work with, which means more power and speed. Charge your scooter before each ride to get the best performance and enjoy faster acceleration.
Ride with Better Aerodynamics
How you ride matters. Reduce wind resistance by leaning forward slightly and wearing tight-fitting clothes. This streamlined posture helps air move around you smoothly, so you can go faster with less effort.
Tune the Motor and Improve Cooling
If you’re comfortable with tweaks, adjust the motor controller to deliver more power. Also, clean out any dust or debris around your motor and vents. Keeping the system cool helps it run at peak performance without overheating.
- Also Read: Regenerative Braking in Segway Ninebot
6 Advanced Speed Hacks to Make Segway Ninebot Max G30LP Faster (Tried & Tested)
Turn Off the Speed Limit
Removing the speed limit on your Ninebot Max G30LP is a quick way to unlock extra speed. If the standard method doesn’t work, downgrade your firmware—and you’re good to go.
Method 1: Use the ScooterHacking Utility App
- Download the app and turn on your scooter.
- Go to the “Tools” section and select “Change region.”
- Choose “Global – (Your Scooter’s Model).”
- Your scooter will reboot and you’ll notice a new region and serial number.
Method 2: Use the XiaoFlasher App (Android only)
- Install XiaoFlasher and download the G30DRAGSTER.zip file (don’t unzip).
- Turn on your scooter and connect to the app.
- Tap your scooter’s name, go to “Change Region,” and pick “US 30KM/H.”
- Choose “Custom Serial” and enter your scooter’s serial number.
- Select the zip file and tap “Flash Selected ZIP file.”
- Reboot the scooter—you’re unlocked!
Want the full walkthrough? Check out the complete guide on removing the Ninebot speed limiter.
Install a Custom Speed Controller
Your scooter’s top speed is partly limited by the motor generation. Gen 1 motors max out around 33 km/h, while Gen 2 can hit 38–40 km/h downhill.
For even more speed, consider upgrading the controller. Look for one with adjustable speed settings and a 25–30 amp range. Pair it with firmware tweaks and battery upgrades for best results.
Need help finding the right parts? The “My Max Mods” website is a great place to start.
Add or Upgrade the Battery
Reaching speeds of around 45 km/h on your Ninebot Max G30LP is absolutely possible, but it comes down to the battery setup. You’ll either need a custom 48V battery or an extra battery pack connected in series with the original one.
Installing a custom 48V battery is the more powerful option. But it’s also complicated and pricey especially if you hire someone to build it for you. The second method, adding an extra battery, is cheaper and easier to do yourself. However, it comes with safety risks if not done properly.
That said, upgrading or adding batteries to a 48V system can be done safely if you take the right steps. It’s a common mod in the e-bike and e-scooter world.
Below are a few key guidelines to follow:
Understand Your System: Know your scooter’s current battery specs before making any changes. Pay attention to the voltage, capacity, and battery type. The more you understand your setup, the fewer surprises you’ll run into.
Check Compatibility: Make sure the new battery matches your existing one in both voltage and capacity. Mixing batteries with different specs or chemistry types can cause poor performance or damage.
Stick to the Same Battery Type: If your current battery is lithium-ion, stick with lithium-ion. Mixing battery chemistries (like lead-acid and lithium) can be unsafe and lead to system failures.
Match Battery Capacity: If you’re adding a second battery, try to match the capacity (Ah rating) of the original. This helps both batteries discharge evenly, which improves efficiency and safety.
Use a Series Connection: To increase speed, wire the batteries in series—not in parallel. This boosts the voltage, which can improve performance if your controller supports it.
Consider Space and Mounting: Make sure there’s enough room on your scooter to mount an extra battery. It should be secure, balanced, and not compromise the scooter’s frame or handling.
Upgrade the Charger if Needed: With more power comes more charging needs. Depending on your setup, you might need a compatible 48V or even 52V charger to safely juice up your system.
Upgrading the Motor (Best Paired with a Battery Upgrade)
If you’re upgrading your battery, it’s the perfect time to consider upgrading the motor too. A better motor can drastically improve your scooter’s speed, acceleration, and overall performance. Just make sure you choose a reliable brand with a solid reputation. It’ll pay off in the long run with smoother rides and better durability.
A motor upgrade is one of the most effective ways to take your scooter’s performance to the next level. It’s especially important if you’re boosting your battery voltage or capacity.
Here’s what you need to know before making the switch:
Check Compatibility: Make sure the new motor works with your scooter’s system and the upgraded battery. The voltage and power ratings should match to avoid damaging components.
Choose the Right Motor Type: You’ll typically pick between brushless (BLDC) and brushed DC motors. BLDC motors are more efficient and durable. They’re a great choice for long-term use.
Pick the Right Power Rating: A higher wattage motor gives you better acceleration and a higher top speed. But be careful—too much power can strain your scooter’s other parts if they’re not up to par.
Understand Torque Needs: If you want better acceleration (great for hills), look for a motor with high torque. If top speed is your goal, prioritize that in your motor choice.
Check Mounting and Fit: Don’t forget the basics. Make sure the new motor will fit properly without forcing modifications. The mounting points and dimensions should line up to avoid weakening the frame.
Unlocking Speed While Going Downhill
You can actually bypass some of your scooter’s speed limits with a few simple tweaks. First, open your scooter’s companion app. Look for the setting that controls adaptive or regenerative braking (also known as “KERS”) and turn it off.
Once that’s done, the next time you’re going downhill, just release the throttle and let the scooter roll freely. You’ll notice a smoother and faster descent. Make sure to use your mechanical brakes to stay in control.
If your app doesn’t allow turning off regenerative braking, you can install custom firmware. Use the same apps mentioned earlier in the “Turning Off Speed Limits” section to get it done.
Switching to Solid Tires for Better Speed
Swapping out your pneumatic (air-filled) tires for solid ones won’t directly boost your top speed. But it can make your ride feel faster and more responsive. Here’s why:
Less Rolling Resistance: Solid tires roll with less friction than air-filled ones. That means your scooter doesn’t have to work as hard to move forward, which can make it feel quicker and more efficient.
No Energy Loss from Compression: Pneumatic tires compress slightly as they spin, soaking up some of your scooter’s power. Solid tires don’t do that. Their rigid structure allows more of the motor’s energy to go straight into movement.
Tighter, More Responsive Ride: Because solid tires don’t flex as much, they respond faster when you accelerate or brake. That gives your scooter a snappier, more direct feel.
Just keep in mind that solid tires might improve the feel of speed. However, your scooter’s actual top speed depends on other factors like motor power, aerodynamics, and overall weight.
- Also Read: Segway Ninebot is Not Accelerating
Optimize Speed with the Right Mode
Your Segway Ninebot comes with multiple speed modes. If you’re looking for more power and quicker acceleration, switch to the highest setting. It not only boosts your top speed but also helps your scooter climb hills more easily.
How to switch to Sport Mode:
- Open the Ninebot App.
- Tap on the “Speed Mode” option.
- Select “Sports” Mode for maximum performance.
- Also Read: Fix Ninebot Scooter Charging Problems
Conclusion
These speed hacks are your starting point. From simple tricks like adjusting your tires to advanced upgrades like firmware tweaks and motor swaps, there’s plenty to explore. No matter your skill level, every rider can find something that suits their style.
Take full control of your scooter’s performance. Just remember to prioritize safety with every change. For next-level mods and inspiration, check out “My Max Mods” and unlock what your Ninebot is truly capable of.
Frequently Asked Questions (FAQs)
1. How does a lightweight design improve scooter speed?
Removing unnecessary parts from your scooter helps reduce weight, making it more agile and faster. Just make sure the load stays balanced for smooth and stable performance.
2. Why does tire alignment matter for speed?
Keeping your tires properly aligned and inflated cuts down on friction with the ground. Even something as simple as pumping up low-pressure tires can boost your speed by 1–3 mph.
3. How does brake inspection affect speed?
If your brake pads rub against the rotor, they create drag that slows you down. Make sure the brake lever snaps back into place after use to keep your ride smooth and efficient.
4. Why charge your battery before every ride?
A fully charged battery gives your motor more voltage to work with, which means more power and better speed. Topping up your battery before heading out ensures peak performance.
5. How does adjusting the motor controller help with speed?
Tweaking your motor controller settings can unlock more speed. Just remember to clean out any dust or debris around the motor to keep it cool and running efficiently.