How to Reset Gotrax G3 and G4 Locks: Unlock, Disable and More for Cable & Digital Locks

The Gotrax G3 and G4 electric scooters are reliable and easy to use. They come with cable and digital locks to keep your scooter safe. Knowing how to reset Gotrax G3 and G4 locks is key to avoiding lock issues and ensuring smooth rides.

This guide will walk you through unlocking, resetting, disabling, replacing, and troubleshooting these locks step by step.

Gotrax G3 and G4 Locks: An Overview

The Gotrax G3 and G4 scooters have two main types of locks:

Electronic / Digital Lock

This lock adds more security. When you turn on the scooter, it asks for a 3-digit code. If you enter the wrong code and try to move the scooter, it beeps loudly. It also locks the wheels and cuts power to the motor.

Cable Lock

This lock is built into the steering tube with 4 screws. It helps you secure your scooter against theft. The cable lock has four number wheels, a SET switch to change the code, and a button to lock and unlock the cable pin.

The cable is short. Someone can cut it with special tools. You can also unscrew the cable lock from the steering column.

Now, let’s learn how to manage these locks.

How to Unlock Gotrax G3 and G4 Locks

Unlock the Electronic / Digital Lock

The default code is 000.

  • Use the “+” and “-” buttons to set each digit.
  • Press the power button to confirm each digit.
  • Do this for all three digits.
  • Press the power button twice to unlock and turn off the lock.

Unlock the Cable Lock

The default code is 0000.

  • Make sure the SET switch (above the wheels) is in the left position.
  • Turn the number wheels to your code.
  • Press the button and pull out the lock pin to open the cable lock.

How to Reset Gotrax G3 and G4 Locks: Change or Reset Passcodes

Changing the default password is important for your scooter’s security. Here’s how to set your own code.

Set a New Passcode for the Digital Lock

  • Press and hold the “–” button and the power button together for 10 seconds.
  • Use the “+” button to choose the first digit of your new code.
  • Press the power button to confirm.
  • Repeat for all three digits.
  • Press the power button twice to finish and unlock.

Set a New Passcode for the Cable Lock

  • Insert the cable lock pin into the lock.
  • Slide the SET switch to the right (Set position).
  • Turn the number wheels to your new 4-digit code.
  • Slide the SET switch back to the left to save the code.
  • Shuffle the wheels to lock it.

Tip: Take a photo of your new cable lock code before shuffling the wheels. This helps you remember it later.

How to Disable and Remove Locks on Gotrax G3 and G4

If entering the passcode every time is annoying, or you don’t want the cable lock, here’s how to disable or remove them.

Disable the Electronic / Digital Lock

  • Press and hold the power button and the plus (+) button together for 10 seconds.
  • You’ll hear a beep confirming the lock is disabled.
  • This turns off the lock temporarily.
  • To enable it again, just repeat the same steps.

Remove the Cable Lock

  • Use a T20 screwdriver to unscrew the four screws holding the cable lock.
  • Take off the cable lock from the scooter.
  • You can remove or replace the cable lock easily this way.
  • To install a new lock, just screw it back in place.

How to Replace Gotrax G2 Locks

Replace the Cable Lock

  • Use a T20 screwdriver to remove the four screws holding the cable lock.
  • Take off the old cable lock from the scooter.
  • To install a new one, screw it back in place.
  • This makes replacing the cable lock quick and easy.

Replace the Electronic / Digital Lock

  • If you forget the digital lock code, you cannot reset or disable it.
  • The only option is to replace the entire control unit.

Troubleshooting Your Gotrax Locks

Fix Forgotten Cable Lock Passcode

  • Unscrew the cable lock from the tiller.
  • Remove the silver plate on the back.
  • Rotate the number wheels until the flat parts of the inner disks line up.
  • Turn all the wheels together until the lock opens.

Try Default Passcodes

  • Use default codes like “000” or “0000” if your lock won’t open or deactivate.

Check for Physical Damage

  • Look over the lock for any visible damage or blockages.

Check Battery Level

  • Make sure your scooter battery is charged. Low power can cause electronic lock problems.

Read the User Manual

  • Always check the user manual for more troubleshooting tips.

Conclusion

The Gotrax G3 and Gotrax G4 scooters are reliable and convenient for city travel. Their locks keep your scooter safe.

You’ve learned how to handle both the electronic and cable locks. This includes unlocking, resetting passcodes, disabling, and removing them.

Follow this guide to manage your locks with ease. Keep your scooter secure and enjoy every ride without worry.