If your Hiboy S2 scooter won’t turn on, you’re not alone — many riders encounter this issue. Start by checking the basics: inspect the battery, charging port, and power switch, and look for any damage or loose wiring.
If everything appears fine but your Hiboy S2 scooter still won’t turn on, try resetting or replacing the controller. For persistent problems, consult the user manual or reach out to Hiboy support for help.
This guide will walk you through each troubleshooting step for the Hiboy S2, S2 Pro, and S2 Max. We’ll cover the most common reasons your scooter won’t power up and offer simple fixes. These include checking the battery and charging port, as well as inspecting wiring and fuses.
Follow these expert tips, and you’ll have your scooter back on the road in no time.
Charging, Battery & Fuse Issues When Your Hiboy S2 Scooter Won’t Turn On
Check the Battery
A dead battery is the most common reason your Hiboy S2 won’t turn on. Here’s what to do:
- Plug your scooter into the charger and make sure the outlet is working.
- Let it charge for a few hours, even if the indicator shows full. Deeply drained batteries need extra time to recover.
- After charging, try turning on your scooter.
- If it still won’t turn on, replace the battery with a genuine Hiboy battery.
Inspect the Charging Port
The charging port is crucial for powering your scooter. Check it carefully:
- Look inside the port for dirt, damage, or bent pins.
- Clean out any debris gently.
- Make sure the charger fits securely and snugly.
Check the Power Switch
Sometimes the simplest fix works best. Make sure the power switch is on:
- Find the power switch on your scooter.
- Flip it on and off a few times to ensure it’s working properly.
- Try turning on the scooter again.
Inspect the Fuses
A blown fuse can stop your scooter from turning on. Here’s how to check:
- Open the bottom front part of your scooter.
- Look for the 5-amp fuse, usually under orange tape or a protective cover.
- If the fuse is blown, replace it with a new one of the same rating.
Wiring & Controller Issues When Your Hiboy S2 Scooter Won’t Turn On
Check the Wiring
The wiring in your scooter is like its nervous system. Any damage or loose connections can cause problems, especially near the stem joint where the handlebars rotate.
- Look closely at all wires for signs of damage, fraying, or looseness.
- If you spot any issues, secure the wires tightly with tape near the stem joint to prevent disconnections.
Reset the Controller
Resetting the controller can fix many electronic glitches. Here’s how:
- Turn off your scooter.
- Press and hold the power button for 10 seconds.
- Disconnect the battery under the deck.
- Wait 10 minutes with the battery disconnected.
- Reconnect the battery and try turning on the scooter.
If this doesn’t work, you might need to replace the controller.
Replace the Controller
If resetting doesn’t help, replacing the controller often solves the problem.
- You can buy a new controller from the official Hiboy online store.
- Install the new controller to restore your scooter’s functionality.
Watch for Overheating
Riding your scooter hard can cause it to overheat and shut down as a safety measure.
- Let your scooter cool down if it’s been used intensively.
- After cooling, try turning it on again.
- Check the wiring near the battery and controller for any signs of heat damage.
- Also Read: How to Make Hiboy S2 Faster
Throttle & Brake Issues When Your Hiboy S2 Scooter Won’t Turn On
If your scooter powers on but won’t move or accelerate, try these simple fixes:
Check the Brake Levers
Most electric scooters have a safety feature that stops them from moving if the brake levers are pressed.
- Make sure both brake levers are fully released.
- Then, try turning on your scooter again.
Fix a Dislodged Throttle Magnet (Especially on the S2 Pro)
The throttle magnet can sometimes come loose, especially on the S2 Pro model. When this happens, your scooter might not move or accelerate properly.
- Check if the throttle magnet is out of place.
- Use screwdrivers or Allen wrenches to securely reattach it to the handlebar.
- Tighten all screws and fasteners to keep it from coming loose again.
- Also Read: Gotrax GXL V2 Not Accelerating
User Manual & Professional Help
Check the User Manual
Your user manual is a great place to start when troubleshooting.
- Look for model-specific tips and instructions.
- Manuals often include solutions tailored to your scooter.
Get Professional Help When Needed
If you’ve tried everything and your scooter still won’t work, or if you’re not comfortable fixing it yourself, it’s best to get expert help.
- Contact a professional technician or Hiboy customer support.
- Keep in mind that professional repairs or support may come with a fee.
Use your manual first, and don’t hesitate to ask for help if needed.
Preventive Tips to Keep Your Hiboy S2 Running Smoothly
To avoid power-up and turning-on issues with your Hiboy S2, follow these simple preventive steps:
Regular Maintenance
Treat your scooter like any other vehicle. Clean it regularly, lubricate moving parts, and check that all connections are tight. Keeping it well-maintained reduces the chance of problems.
Charge Properly
Use only the charger that came with your scooter. Don’t overcharge-unplug once it’s full. Try to recharge before the battery drops below 20% to keep it healthy.
Ride Safely
Stick to smooth, flat surfaces to avoid putting extra strain on your scooter. Don’t overload it with heavy weight and avoid pushing it to top speed all the time.
Store Carefully
Keep your scooter in a dry, safe place away from extreme heat or cold. Proper storage protects the battery and other parts.
Do Safety Checks
Before every ride, quickly check brakes, tires, and controls to make sure everything is working properly.
- Also Read: Gotrax Scooter Charged But Not Working
Conclusion
Troubleshooting your Hiboy S2, S2R, Pro, or Max when it won’t turn on can feel overwhelming, but you can often solve the problem with a few practical steps.
Start by checking the battery and giving it a full charge, inspect the charging port, make sure the power switch is on, and look at the fuses. If the scooter still won’t power up, examine the wiring and controller, and check for throttle or brake lever issues.
If these steps don’t work, consult your user manual for model-specific advice or reach out to a professional for help. To avoid future problems, keep up with regular maintenance, use proper charging habits, ride safely, store your scooter correctly, and do a quick safety check before each ride.
By following these steps, you’ll keep your Hiboy S2 running smoothly and enjoy worry-free rides.